Table of Contents
Related Manuals for ZKTeco ZKMD372
Summary of Contents for ZKTeco ZKMD372
- Page 1 User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera Document Version: 1.7 Date: 2012.10 Introduction This document mainly introduces the functional features, installation process and access methods of ZKMD3 series IPC. .
- Page 2 Important Notices Thanks for selecting our company’s IPC. Before use, please read through the user’s guide to avoid any unnecessary damage! All functions depend on the actual product. Since the product is subject to updating, our company is not responsible for any difference from this guide and not liable for any dispute over different technical parameters from this guide.
-
Page 3: Table Of Contents
Table of Contents Table of Contents 1 Overview ....................... 1 1.1 Product Description ..................1 1.2 Product Features ..................1 1.3 Technical Parameters ................... 3 1.4 Product Appearance ..................5 1.5 Connecting Terminals .................. 7 1.6 Basic Procedure ..................11 2 Installation and Network Configuration ............12 2.1 Hardware Installation ..................12 2.2 Operating Environment ................17... -
Page 4: Overview
Overview 1 Overview 1.1 Product Description The ZKMD3 series products are day/night vandal-proof color IP cameras, which feature the aluminum alloy die casting design and IP66 protection grade. The series products are equipped with 2-megapixel CMOS sensors or high-quality CCD sensors made by Sony, which feature the long-distance infrared lamp projection, wide projection angle and night vision capability. - Page 5 User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7 Safe and reliable socket head lock screws Double-glass front cover for better optical isolation and mist prevention surface for better night viewing Three-layer shield +magnetic ring design to eliminate signal interference ...
-
Page 6: Technical Parameters
Overview 1.3 Technical Parameters Product Name Anti-Riot Infrared Semi-Spherical IP Camera Product Model ZKMD372 ZKMD352 Cam Properties 1/3" megapixel progressive 1/3.2" two-megapixel Image Sensor CMOS sensor progressive CMOS sensor WDR HD Image Resolution 1280×720 Day/Night Switch IR-Cut filter switch Type of Lens... - Page 7 User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7 adjustable Functional Interfaces Audio Interface 1 Mic input and 1 linear output (optional) Alarm Input 1 alarm input (normally opened or normally closed) (optional) 1 switch output, maximum working voltage: AC 120V/1A, DC Alarm Output 24V/1A Motion Detection...
-
Page 8: Product Appearance
Overview 1.4 Product Appearance Diagram of ceiling mounted mode fixing base camera transparent cover Diagram of wall mounted mode wall mounted bracket fixing base camera transparent cover Dimensional drawing of ceiling mounted mode (in mm) Right View ... - Page 9 User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7 Right View Front view...
-
Page 10: Connecting Terminals
Overview 1.5 Connecting Terminals Power Interface: Connect to the adapter. This IPC employs the power supply of DC 12V and no lower than 1.5A. Do not use any different power supply as it may damage the camera. Network Interface: 10/100M self-adapting Ethernet interface is used to connect the camera with various network equipments, such as, switch, router and hub. - Page 11 User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7 Alarm Interface: Connect to alarm input and alarm output. When the camera receives an alarm from alarm output or Web motion detection, this interface can send a signal to alarm output to realize real-time monitoring and overall protection while triggering a remote alarm.
- Page 12 Overview Notice: When external alarm input is started, different alarm inputs have different software settings. Please select “Normally Opened” or “Normally Closed” on the Web page according to the type of alarm input, as detailed in User Manual – Using Browser for Video Surveillance. The schematic diagram of alarm output default connection is as follows: Alarm Output Alarm...
- Page 13 User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7 The relevant parameters are set as detailed in User Manual – Using Browser for Video Surveillance. The specific interface is shown in following figure. 485+ 485- Audio Input Interface: Connect to external audio acquisition (e.g. MIC) for sound acquisition as detailed in User Manual –...
-
Page 14: Basic Procedure
Overview 1.6 Basic Procedure Unpack and check whether any component is missing; Connect the camera to computer by means of patch cable; If your computer IP is in a network section different from camera IP, please set it to the same network section as camera IP, such as, 192.168.1.87. Log in the camera through client software or browser to check whether the video functions normally;... -
Page 15: Installation And Network Configuration
User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7 2 Installation and Network Configuration 2.1 Hardware Installation Installation Notices: Read through the guide for installation prior to installation. Check whether any component is missing against the packing list, if yes, please contact your supplier. - Page 16 Installation and Network Configuration Use the standard power cord when the power supply is too far away from the camera, and consider the voltage drop caused by long distance. Read through the instructions for connecting terminal and wire strictly according to interfaces. Any damage to the camera due to improper operation will be disqualified from the guarantee.
- Page 17 User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7 Use the camera in the working conditions: Ambient temperature: -20 ℃ ~ +55 ℃; ambient relative humidity: 10% ~ 95%RH. Please keep the lens and transparent cover clean. If the transparent cover is dirty, please wipe it with clean soft cloth.
- Page 18 Installation and Network Configuration Ceiling mount installation method: wiring hole positioning hole Installation template for ceiling mounted mode (unit: mm) ③ ② ④ ①Affix the paper template to the ceiling and drill holes according to the marked circles in the paper template. ②Affix the camera and pedestal to the ceiling by 4 screws.
- Page 19 User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7 Wall mount installation method: wiring hole positioning hole Installation template for wall mount method (unit: mm) ③ ② ④ ⑤ ①Affix the paper template to the wall and drill holes according to the marked circles in the paper template.
-
Page 20: Operating Environment
Installation and Network Configuration 2.2 Operating Environment Operating System: Windows 98/ Windows2000, 2003, XP, Vista/ Windows 7; CPU: Pentium III 1GHZ or higher; Memory: 256MB or higher, at least 128MB (possibly affect performance and some functions); HDD: 1.5GB available; Screen Resolution: 800×600 or higher; Browser: IE6.0 or latest version;... - Page 21 User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7 Notice: 1) The default IP address is “192.168.1.88” and the default HTTP port is 80. If needed to change IP address or port, refer to Network Setting in User Manual –...
-
Page 22: Accessing Device
Accessing device 3 Accessing device There are 4 methods can be used to access the device: Browser, RTSP Media Player, Mobile Device and Video Surveillance Software (ZKiVision client software). 3.1 Using Browser Open a browser, type in the dynamic domain name or IP address of the device (e.g. -
Page 23: Using Rtsp Media Player
User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7 Note: When accessing the device via browser for the first time, it is necessary to download the control. More details about how to use browser for video surveillance, please refer to User Manual – Using Browser for Video Surveillance in the supplied CD. - Page 24 Accessing device Type in the network URL in the form of rtsp://<IP address>:<RTSP port>/<stream code>.
-
Page 25: Using Mobile Devices
User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7 Click “Play” and the media player will play the real-time video of the device. Note: 1) The default RTSP port of device is 554. If it must be modified, please refer to User Manual –... - Page 26 Accessing device Install the media player in the supplied CD into the mobile device. Click the icon “HIPlayer” to enter the media player.
- Page 27 User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7 Click the button at the lower right corner to the setting interface, type in the user name, password, domain name and port of the device, or select a set device from the favorite.
-
Page 28: Using Video Surveillance Software
Accessing device 3.4 Using Video Surveillance Software ZKiVision Client Software is our company's free video surveillance software, which can help manage and monitor multiple devices in a real-time manner. Install the software in the supplied CD, and add devices to the software. Then the real-time monitoring can be started.