Page 1
FTP Setup for ZKTeco IP Camera 1. If your computer IP address is in different gateway with that of camera, please change your computer IP address in the same gateway as camera, for example, 192.168.1.87. 2. In the IE browser, please input camera IP address (default IP “192.168.1.88”) and enter, then below dialog table will come out.
Page 2
For FTP Setting 1. Go to `Adcanced Settings’ then click ‘FTP Settings’. 2. Fill in the FTP Settings. a. FTP Server Name: ftp.epicamera.com b. FTP Port: 21 c. User Name: (FTP Login ID). d. Password: (FTP Password). e. Passive Mode: ON f.
Page 3
For Timer Setting 1. Go to `Adcanced Settings’ then click ‘Timer Capture’. 2. Enter 5 into the Seconds box. 3. Tick the Save Picture to FTP Server checkbox 4. Click `Confirm’. If you face any problem during setting up your camera, please do not hesitate to email us at support@epicamera.com. Our technical support will get back to you as soon as we can.