Dab Mode; Displaying­dab­station­informa- Tion - Grundig WTR 3200 BT DAB+ WEB Manual

DAB­MODE
Selecting­the­DAB­input­source
1 To enter DAB radio mode, either press »Menu«
button --> select "Main menu" --> DAB radio or
press »Mode/AL« button then turn the Vol-
ume knob clockwise or anticlockwise to scroll
left or right through the mode list until DAB ra-
dio is highlighted and press »OK«.
Selecting­a­DAB­station­–­from­
presets­
1
Open a DAB station by pressing »1« to »5+«.
Selecting­a­DAB­station­–­from­
the­station­list­
The available DAB stations are stored in a »Sta-
tion list«.
1 Open the DAB menu using »MENU«.
2 Select the option »Station list« by pressing
» « or » « or by turning the Volume Knob,
and open by pressing »OK«.
FM­MODE
Selecting­the­tuner­input­source
1
To enter FM radio mode, either press »Menu«
button --> select "Main menu" --> FM radio or
press »Mode/AL« button then turn the Volume
knob clockwise or anticlockwise to scroll left or
right through the mode list until DAB radio is
highlighted and press »OK«.
Selecting­stations­–­from­presets
1
In the »FM radio« mode, press »1« to »5+« on
the remote control to select the presets from 1
to 10.
Selecting­stations­–­from­the­list­
Recall­Preset
1
Press » «.
2
Select the presets from 1 to 10 by pressing
» « or » « or by turning the Volume Knob.
20­ ­ ENGLISH
­---------------------------------------------------------------------------------------------------------------------------------
­--------------------------------------------------------------------------------------------------------------------------------------
3
Select a DAB station by pressing » « or
» « or by turning the Volume Knob, and open
by pressing »OK«.
– Display: »Playing«, the DAB station selected
can be heard.
Displaying­DAB­station­informa-
tion
1
To display information on the current DAB sta-
tion, press »i« repeatedly.
– The following displays appear in succession:
The location and the frequency;
reference to signal interference, e.g. »Sig-
nal error 10« (at optimum signal »Signal
error 0«);
Bit rate, broadcasting format and the
channel;
the current date;
radio text as ticker text
Note:
The information is displayed continuously un-
7
til »i« is pressed again.
3 Confirm the preset by pressing »OK«.
Setting­stereo­or­mono­reception­­
1 Press »MENU« to open the menu.
2
Select the option »Audio setting« by pressing »
« or » « or by turning the Volume Knob and
confirm by pressing »OK«.
3
Switch to mono reception by selecting the
»YES« button using » « or » « or by turning the
Volume Knob and confirm by pressing »OK«.
Stereo reception is set using the »NO« button.
4
Press »MENU« to end the setting.