What Is Wrong And Why - Zanussi ZCGHL55X Instruction Booklet

What is wrong and why?

We strongly recommend that you carry out the following checks on your
appliance before calling your local Service Force Centre.
Problem
The oven, grill or hotplate will not light.
Check
l
If you cannot hear any sparking when you press the ignition button
there may be a fault with the electrical supply. First check the socket
by trying out another piece of electrical equipment in it. If that works,
renew the fuse in the plug. Use a 3 amp fuse. If the fuse 'blows'
again there is a fault on the appliance. Do not use a fuse with a
rating higher than 3 amps. Do not carry out other electrical work.
Unplug the appliance and tell your installer. If the appliance will not
light because there is an electrical power failure such as a power cut
you cannot use the main oven. All other burners may be lit with a
match.
l
Check that there is not a problem with your gas supply. You can do
this by making sure that other gas appliances such as your central
heating or gas fire are working.
l
If only the hotplate burners will not light, make sure that the burner
parts have been replaced correctly.
Problem
Food is cooking too quickly or too slowly.
Check
l
Check that you are using the recommended gas marks and shelf
positions. Be prepared to adjust the gas mark up or down to achieve
the results you want.
Problem
The oven light will not work.
Check
l
If the light does not work you probably need to replace the bulb.
Check there is not a fault with the electrical supply. Check this by
pressing the ignition button. If you cannot hear sparking there is
probably a fault.
l
First, check the socket by trying out another electrical appliance in it,
if that works renew the fuse in the plug. Use a 3 amp fuse. If the fuse
'blows' again this indicates that there is a fault on the appliance. Do
not use a fuse with a higher rating than 3 amps. Do not carry out
further electrical work. Unplug the appliance and inform your
installer.
Z C G H L 5 5 X
36