Fibre Channel Port
Figure 4-11
Figure 4-12
Removal of GBIC Protector
Multi-Mode Fiber Support 1.0625 Gbaud Dual SC
Single-Mode Fiber Support1.0625 Gbaud Dual SC
To connect the FCR200 to the Fibre Channel Storage Area
Network:
1
Locate the Fibre Channel port on the back of the
FCR200.
2
Remove the rubber protector from the GBIC, as
shown in Figure 4-12, and push the metal latch
down to lock it into place.
connectors
connectors
Fibre Channel Connection
4-13