ADIC FCR 200 Operator's Manual page 38

Nomenclature
Spectral Centre Wavelength
Operating Range
Launch Power Max
Launch Power Min
Receive Power Min
Receive Power Max
Extinction Ratio
TX Deterministic Jitter
Fibre Diameter
Class
3-6 Safety
If other then the shipped optical GBICs are used with this
product then the user is required to insure that the optical
GBIC being used meets all of the above requirements. If the
GBIC is not certified then this product's laser safety
certification becomes null-and-void.
Certifications include one or more of the following:
• Recognized Component by Underwriters Laboratories
• Certified by the Canadian Standard Association
• Certified by VDE (Germany) and/or Certified by Statens
Provningsanstalt (SP) in Sweden
The following shows the Class 1 information label specified in
IEC 825 and CENELEC HD 482 51. This label is attached to
this product.
Class 1 Laser Product
Laser Klasse 1
Luckan 1 Laserlaite
The following information provides the typical operational
parameters for the Optical Laser GBIC included with the
FCR200.
Parameter Shortwave
100-M5-SN-I
770-850nm
2-500m
1.3 dBm
-7 dBm
-13 dBm
1.3dBm
6 dB
20 ps
50um
Multi-mode
Longwave
100-SM-LC-L
1300nm
2-10km
-3 dBm
-20 dBm
-3 dBm
9 dB
20 ps
9um
Single-mode
62-9301-01