Processing Fibre Channel Information - ADIC FCR 200 Operator's Manual

Figure 2-7 Information processing

Processing Fibre Channel Information

6 Data flows between the host and target through
DirectFlow
7 Response information flows from the SCSI target
back to the FC host.
The FCR200 processes information from the SCSI bus host by
requesting operations of targets on a Fibre Channel Storage
Area Network (SAN). The information is processed using the
same method as described in the previous section, except it
begins with the SCSI host bus issuing commands and the
information passing through the FCR200 to the FC SAN.
payload buffers.

Processing Fibre Channel Information

2-11