Turbosound TSTAND-01 Quick Start Manual

Turbosound TSTAND-01 Quick Start Manual

Lightweight adjustable speaker stand for 1 3⁄8" (35 mm) pole mounts

Advertisement

Quick Start Guide

ACCESSORIES TSTAND-01

Lightweight Adjustable Speaker Stand for 1 3⁄8" (35 mm) Pole Mounts
TSTAND-01 is a lightweight, adjustable aluminium speaker stand for mounting
and elevating loudspeakers at a height of 4' 5" to 7' (1.35 m to 2.15 m).
TSTAND-01 connects to 1 3⁄8" (35 mm) pole sockets and features a friction screw
and locking pin for stable height adjustment.
To deploy TSTAND-01, follow these steps:
(1) Open the support legs:
a.
First, loosen the lower friction screw in the sliding support collar by
rotating the knob counter-clockwise.
b.
Pull the support legs outward while pressing gently downward on
the support collar.
c.
Re-tighten the lower friction screw by rotating the knob clockwise
until the friction screw holds the legs and support collar fi rmly in
place against the lower tube.
(2) Place the speaker stand on a stable surface.
(3) Adjust the stand height:
a.
First, loosen the upper friction screw by rotating the knob counter-
clockwise.
b.
Slide the upper section of tubing up or down until you fi nd an
acceptable height.
c.
Re-tighten the upper friction screw by turning the knob clockwise
until the friction screw holds the upper tube fi rmly in place.
(4) Guide your loudspeaker down onto the top of the speaker stand until the
stand's top is securely seated in the loudspeaker's pole socket.
(5) If necessary, re-loosen the upper friction screw and adjust the upper
section up or down until you fi nd your desired height. Then, re-tighten the
friction screw by rotating the knob clockwise until secure.
LEGAL DISCLAIMER
MUSIC Tribe accepts no liability for any loss which may be suff ered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifi cations,
appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND,
TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA and COOLAUDIO are trademarks or registered trademarks of MUSIC Tribe Global Brands Ltd. © MUSIC Tribe Global Brands Ltd. 2018 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding MUSIC Tribe's Limited Warranty, please see complete details online at musictri.be/warranty.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TSTAND-01 and is the answer not in the manual?

Questions and answers

Summary of Contents for Turbosound TSTAND-01

  • Page 1 MUSIC Tribe accepts no liability for any loss which may be suff ered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifi cations, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA and COOLAUDIO are trademarks or registered trademarks of MUSIC Tribe Global Brands Ltd.
  • Page 2 ACCESSORIES TSTAND-01 Mounting Specifi cation iP82 4.8 kg (10.5 lbs)

Table of Contents