Page 2
On the indoor side, place the flat Download the Ring app. edge of the Door View Key into the The Ring app walks you through setting up slots on your peephole and rotate and managing your Door View Cam. counter-clockwise to unscrew it.
Page 3
Remove the outdoor half. Place the outdoor assembly. With the indoor side removed, From the front side of your door, insert the outdoor portion should the tube through the hole until your slide right out. Door View Cam is flush with the door. In the event that it doesn’t, Now it’s time to continue setup on the check again for paint or other...
You might need the included adapter. Remove the rear cover. It’s used to support larger door view holes. Let’s find out if it’ll fit yours... Grasp the thin edge of the indoor assembly body, and pinch the cover at the indentations. Remove the adapter from the Door View Kit tray.
Page 5
Place the indoor assembly. Join the indoor and outdoor assemblies. Next, carefully slide the indoor assembly With the cable out of the way, place the tightening nut from the onto the tube until it’s flush with your Door View Kit tray over the tube and into the hole. door, making sure the outdoor assembly Using either your fingers or the Door View Key, twist clockwise and isn’t pushed out the other side.
Page 6
(don’t put the cover back on just yet). ensuring it is inserted. Complete setup in the Ring app. In the Ring app, select Set Up a Device and follow the in-app instructions. Once setup is complete, place the cover back on your Door View Cam.
Need help?
Do you have a question about the 8SP1S9-0EU0 and is the answer not in the manual?
Questions and answers