Installation and Operation Instruction Manual CEP-81B, 101B, 121B Table of Contents Safety Precautions Safety Precautions ................................Installation Instructions Preparation.................................... Design Notice..................................Ambient Temperature Range For Unit Operating....................Exhaust Hose Installation..............................Choosing The Right Location............................Energy Rating Information ............................. 12 Tools Needed..................................
Installation and Operation Instruction Manual CEP-81B, 101B, 121B Safety Precautions Read Safety Precautions Before Operation and Installation To prevent death or injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring of instructions may cause death, harm or damage.
Page 4
Installation and Operation Instruction Manual CEP-81B, 101B, 121B In a thunderstorm, the power must be cut off to avoid damage to the machine due to lightning. • Your air conditioner should be used in such a way that it is protected from moisture.
Page 5
Installation and Operation Instruction Manual CEP-81B, 101B, 121B • Do not use hazardous chemicals to clean or come into contact with the unit. Do not use the unit in the presence of flammable substances or vapor such as alcohol, insecticides, petrol,etc.
Page 6
Installation and Operation Instruction Manual CEP-81B, 101B, 121B Compliance with national gas regulations shall be observed. Keep ventilation openings clear of obstruction. The appliance shall be stored so as to prevent mechanical damage from occurring. A warning that the appliance shall be stored in a well-ventilated area where the room size corresponds to the room area as specified for operation.
Page 7
Installation and Operation Instruction Manual CEP-81B, 101B, 121B Caution: Risk of fire/ flammable materials (Required for R32 units only) Explanation of symbols displayed on the unit(For the unit adopts R32 Refrigerant only): This symbol shows that this appliance used a flammable refrigerant. If the refrigerant WARNING is leaked and exposed to an external ignition source, there is a risk of fire.
Page 8
Installation and Operation Instruction Manual CEP-81B, 101B, 121B The area shall be checked with an appropriate refrigerant detector prior to and during work, to ensure the technician is aware of potentially flammable atmospheres. Ensure that the leak detection equipment being used is suitable for use with flammable refrigerants, i.e. non-sparking, adequately sealed or intrinsically safe.
Page 9
Installation and Operation Instruction Manual CEP-81B, 101B, 121B being worked upon prior to any removal of sealed covers, etc. If it is absolutely necessary to have an electrical supply to equipment during servicing, then a permanently operating form of leak detection shall be located at the most critical point to warn of a potentially hazardous situation.
Page 10
Installation and Operation Instruction Manual CEP-81B, 101B, 121B oxygen shall not be used for this task. Flushing shall be achieved by breaking the vacuum in the system with OFN and continuing to fill until the working pressure is achieved, then venting to atmosphere, and finally pulling down to a vacuum.
Installation and Operation Instruction Manual CEP-81B, 101B, 121B recovery occurs. The recovery equipment shall be in good working order with a set of instructions concerning the equipment that is at hand and shall be suitable for the recovery of flammable refrigerants.
Installation and Operation Instruction Manual CEP-81B, 101B, 121B Exhaust hose installation The exhaust hose and adapter must be installed or removed in accordance with the usage mode. For COOL,HEAT(heat pump type) or AUTO mode exhaust hose must be installed. For FAN, DRY or HEAT (electrical heat type) mode exhaust hose must be removed.
Installation and Operation Instruction Manual CEP-81B, 101B, 121B What should I look for first when purchasing a portable air conditioner? The right air conditioner helps you cool a room efficiently. An undersized unit won't cool adequately while one that's too large will not remove enough humidity, leaving the air feeling damp. To find the proper air conditioner, determine the square footage of the room you want to cool by multiplying the room length by its width.
Installation and Operation Instruction Manual CEP-81B, 101B, 121B Other Regions Shape Qty. Shape Qty. Name of Accessories Name of Accessories Unit Adaptor 1 pc Security Bracket and 2 Screws 1 set(*) Exhaust Hose 1 pc Drain Hose 1 pc Window Slider Adaptor...
Page 15
Installation and Operation Instruction Manual CEP-81B, 101B, 121B Step Two: Install the Exhaust hose assembly to Hook Hole Seat the unit Insert unit adaptor of the Exhaust hose assembly into the lower groove of the air outlet of the unit...
Installation and Operation Instruction Manual CEP-81B, 101B, 121B Installation NOTE: Once the Exhaust Hose assembly and Adjustable Window Slider are prepared, choose from one of the following two installation methods. Type 1: Hung Window or Sliding Window Installation(For some models)
Page 17
Installation and Operation Instruction Manual CEP-81B, 101B, 121B Security Bracket Security Bracket 2 Screws 2 Screws 4. If desired, install the security bracket with 2 screws as shown. 5. Insert the window slider adaptor into the hole of the window slider.
Installation and Operation Instruction Manual CEP-81B, 101B, 121B Operating Instructions Control Panel Features NOTE: The following control panels are for explanation purpose only. The control panel of the unit you purchased may be slightly different according to the models. Your machine may not contain some indicators or buttons.
Installation and Operation Instruction Manual CEP-81B, 101B, 121B Mode button LED display Shows the set temperature in °C or °F and the Selects the appropriate operating mode. Each Auto-timer settings. While on DRY and FAN time you press the button, a mode is selected modes, it shows the room temperature.
Installation and Operation Instruction Manual CEP-81B, 101B, 121B light illuminates. Press the UP or DOWN button to SLEEP/ECO operation select the desired Auto-on start time. · Press this button, the selected temperature will · When the unit is off, press the Timer button to initiate increase(cooling) or decrease(heating) by 2°F(or 1°F)
Installation and Operation Instruction Manual CEP-81B, 101B, 121B with ).When the continuous drain hose is not used, ensure that the corresponding drain plug and knob are installed firmly to prevent leakage. Remove the upper drain plug drain hose Continuous adaptor √...
Installation and Operation Instruction Manual CEP-81B, 101B, 121B Air Filter Cleaning CAUTION DO NOT operate the unit without filter because dirt and lint will clog it and reduce performance. Upper filter (take out) lower filter A (Press the grill down...
Installation and Operation Instruction Manual CEP-81B, 101B, 121B Troubleshooting Tips Problem Possible Causes Solution The Water Collection Tray is full. Turn off the P1 Error Code unit, drain the water from the Water Collection Tray and restart the unit. Unit does not turn...
Page 24
Coast-Air shall have the right to allow a credit in the amount of the current suggested retail price of the product instead of LIMITED ONE (1) YEAR EXPRESS WARRANTY providing replacement.
Need help?
Do you have a question about the CEP-81B and is the answer not in the manual?
Questions and answers