Velleman VM130N User Manual

Download this manual

1. User manual

Description

Disconnect relay outputs during setup!

1. 'Setup' button

2. 9 to 13Vac or 10 to 15Vdc input

3. Channel 1 relay switch

4. Channel 2 relay switch

5. Heating ON/OFF selection jumper

6. Antenna

7. Channel 1 indication

8. Mode / timer indicator CH1

9. Channel 2 indication

10. Confirm / timer indicator CH2

Do not mount the unit in the proximity of other electronic devices or metal objects.

Straighten the antenna!

Specifications

Receiver:

power supply: 9 to 13 Vac or 10 to 15 Vdc / 130 mA max.

selectable timers per output: 0.5, 5, 30 s / 1, 5, 15, 30, 60 min

open field range of up to 30m

Trransmitter:

12V battery type: V23GA, GP23GA...

CE compliant 433 MHz operation

over 1.000.000.000 combinations

LED flashlight

Features

two relay switches (5 A resistive load)

ON/OFF (toggle) or timer-mode (pulse)

learning unique 32-bit random code

up to 31 different transmitters can be stored

code memory can be erased for safety purposes

internal heating option for cold environment

Transmitter instructions

The transmitter comes with a factory set default code.

NOTE:

Page 1 1. User manual Description Disconnect relay outputs during setup! 1. ‘Setup’ button 2. 9 to 13Vac or 10 to 15Vdc input 3. Channel 1 relay switch 4. Channel 2 relay switch 5. Heating ON/OFF selection jumper 6. Antenna 7. Channel 1 indication 8.
Page 2 Replace the transmitter battery if transmission becomes weak. Loosening the two small screws will give access to the battery. IMPORTANT: Always use fresh batteries before changing your code. Otherwise the transmitter can be damaged . WARNING: THIS UNIT CAN NOT BE USED TO OPERATE MACHINES Changing the code: 1.
Page 3 The relay switch can be set to different modes, from a simple on/of switch to a short or long timer. Configuration of channel 1 ‘CH1’ and channel 2 ‘CH2’ tip: to open the enclosure, loosen the two screws on the side. ( Factory defaults: CH1: 1h timer, CH2: 0.5s pulse) 1.
Page 4 The unit will now respond to the default code only. Please also reset the transmitter to the default code. Posted - Tue, Sep 17, 2019 1:48 PM. Article Number: 1183 | Last Updated: Tue, Sep 17, 2019 3:06 PM Online URL: https://manuals.velleman.eu/article.php?id=1183...