Cleaning And Maintenance - Zanussi ZDE 47100W User Manual

Selecting the programme
Use the programme selector to set the programme you
require.
Selecting additional functions
You can choose from the additional functions (only with
time programmes ) :
button 1 -DELICATE
button 2 -TEXTILE
DELICATE
Pressing this button allows drying to be performed at a
lower temperature, for delicate items. The corresponding
pilot light comes on. This option can also be used for time
controlled drying.
TEXTILE
Press the Textile button repeatedly, to select the desired
option. The relevant light will light up. You can select 2
different options: COTTON cycle: to be used for cotton,
and SYNTHETICS : to be used for synthetic or delicate
items.
Starting the programme
Press the START PAUSE button. The programme is star-
ted.

Cleaning and maintenance

Warning! The tumble dryer is not to be used if
industrial chemicals have been used for cleaning!
8
7 6 5 4
1 2 3
The programme phase is shown by appropriate lights;
light 5- DRYING , light 6- COOLING, light7- END/ANTI-
CREASE .
Changing programme
To change a programme which has been selected by mis-
take once the programme has started, first turn the pro-
gramme selector to OFF position. The programme is
cancelled.
The programme can no longer be changed directly
once the programme has started. If nevertheless
there is an attempt to change the programme on the pro-
gramme knob or if an function button is pressed, led
START PAUSE starts flashing temporarily in yellow. The
drying programme is not however affected by this (laundry
protection).
Drying cycle complete / removing laundry
Once the drying cycle is complete, the lights END/ANTI-
CREASE and FILTER (light 4) are on. If the buzzer function
is active, an acoustic signal will sounds intermittently for
about one minute.
The drying cycles are automatically followed by an
anti-crease phase which lasts around 30 minutes.
The drum rotates at intervals during this phase. This keeps
the laundry loose and free of creases. The laundry can be
removed at any time during the anti-crease phase. (The
laundry should be taken out towards the end of the anti-
crease phase at the latest to prevent creases from form-
ing.)
1. Open door.
2. Remove laundry.
3. Remove filter after clothes has been removed. Clean
the filter.
Warning! Before You place the filter, please check
it there is nothing inside the filter seat.
4. Turn the programme selector to OFF .
Important! Clean the filter after each drying cycle.
5. Close the door.