Machine Settings - Zanussi ZDE 47100W User Manual

Problem
Loading door does not close.
Drying cycle ends shortly after pro-
gramme starts.
Drying cycle lasts an unusually long
time. Note: After around 5 hours the
drying cycle ends automatically.

Machine settings

BUZZER SIGNAL permanent on/off
1. Turn the programme selector to any programme.
10
Possible cause
Residue on inside surface of drum or
drum ribs.
Conductance of water at installation
site differs from standard setting of
machine.
Filter not in place.
Not enough washing loaded or wash-
ing loaded is too dry for selected
programme.
Filter clogged.
Load volume too big.
Laundry insufficiently spun.
2. Press simultaneously theDELICATE and TEXTILE
3. The buzzer is by default always off.
Clean inside surface of drum and
drum ribs.
Re-programme standard setting for
degree of drying (see 'Programming
options' chapter).
Install filter into place.
Select time programme or higher
drying level (e.g. EXTRA instead of
CUPBOARD ).
Clean filter.
Reduce load volume.
Laundry must be adequately spun.
buttons and hold down for approx. 5 seconds.
Remedy