Advertisement
8, Replacing the small 12AT7/12AX7 valves:
The outer pair are 12AT7/ECC81, the inner pair are
12AX7/ECC83 these are phase splitter double triodes.
No set up is required. Care should be taken when
removing and inserting not to bend the pins. If this
happens gently bend the pins back into shape. (These
Thank you for purchasing one of our amplifiers. We
hope you will be pleased with it.
Icon Audio guarantees this amplifier for 12
months from the date of purchase for parts and
labour. Contact you seller. Please keep your
receipt as proof of purchase.
All units are individually tested for performance for at
least six hours before despatch to you. In the unlikely
event that you believe the unit is not functioning
correctly, it may be helpful to contact us first as we
may be able to assist you. Then we would request
that you return the item to us for further action.
You are advised to inform us of any change of
address in order that we may keep you up to date of
any upgrades or improvements. Check our website.
Exclusions
Claims for any damage to either amplifiers or valves
must be reported within three days of receipt.
Valves are classed as consumables on a 12 month
reducing percentage of the cost of replacement
LEDs used for aesthetic and décor purposes are not
covered. These may be disconnected if not required.
17/06/2008 General version
8 Guarantee
icon Audio
351 Aylestone Road Leicester LE2 8TA
www.iconaudio.co.uk
email: sales@iconaudio.com
Phone +44 (0) 116 2440593 mobile +44 (0) 7787 158791
Fax +44 (0) 116 244 0593
valves are similar with the same pin connection;
accidental wrong insertion would not cause damage).
Icon Audio are happy to check the valves or amp &
your re-bias your amp free of charge.
This amplifier is designed for normal domestic hi fi
use. It is not guaranteed for commercial, Public
Address use, or use in other situations. The
guarantee becomes void if the unit has been
modified in any way not approved by Icon Audio.
9 Packing Instructions
It is essential that the original box and packing be
kept in good condition, as this provides vital
protection during transit. Please do not write on
box, but use removable labels. Should the original
box and packaging be lost or become unusable a
repacking charge of one hundred pounds will be
made. If you have any doubts about this please
contact us.
•
Re-use the supplied plastic bag to keep the
amp clean and free from damp.
•
The mains lead fits in a foam cut-out
underneath the amplifier.
•
Insert the piece of cardboard or pieces of
foam between the transformer cover and
the valve guard; this will prevent the valve
cover
damaging
paintwork.
•
Remove the valves and pack in original
boxes and packing.
•
If stored in the box, keep upright.
the
transformer
Page 8
Advertisement
