Table of Contents
Advertisement
Thank you for purchasing one of our amplifiers. We
hope you will be pleased with it.
This amplifier is guaranteed by the dealer you
purchased from for 12 months from the date of
purchase
for
parts
shipping. Valves are consumables and therefore
on a 12 months pro-rata wear basis. Please keep
your receipt as proof of purchase, this will be
needed. (Your statutory rights are not affected)
All units are individually tested for performance for at
least 12 hours before despatch to you. In the unlikely
event that you believe the unit is not functioning
correctly, it may be helpful to contact us first as we
may be able to assist you. Then we would request
that you return the item to us for further action.
You are advised to inform us of any change of
address or change of ownership in order that we may
keep
you
up
to
date
improvements. Check our website.
Exclusions
Claims for any damage to either amplifiers or valves
must be reported within 24 hours of receipt. If you
have
signed
for
the
"unexamined" or any damage to the box any
subsequent claim is unlikely to paid.
This amplifier is designed for normal domestic hi fi
use. It is not guaranteed for commercial, Public
2022-03-10 G version
*See engineers notes at rear
9 Guarantee
and
labour,
excluding
of
any
upgrades
delivery
without
noting
icon Audio
351 Aylestone Road Leicester LE2 8TA
www.iconaudio.co.uk
Phone +44 (0) 116 244 0593 Cell +44 (0) 778 715 8791
sales@iconaudio.com
Address use, or use in other situations. The
guarantee becomes void if the unit has been
modified in any way not approved by Icon Audio.
10 Packing Instructions
It is essential that the original box and packing be
kept in good condition, as this provides vital
protection during transit. Please note we are
unable to supply replacements. Please do not write
on box, but use removable labels.
•
Due to the size, weight and value of this unit
we strongly advise use of a pallet for
shipping to avoid damage.
•
Re-use the supplied plastic bag to keep the
amp clean and free from damp.
•
The mains lead fits in a foam cut-out
underneath the amplifier.
•
Send the valve covers and valves in the
separate supplied box. See above for
valve removal.
or
•
Valves should be removed, numbered and
packed in "Bubblewrap"
protection inside the valve cover.
•
If the amplifier is stored in the box, keep
upright.
•
Do not store in damp conditions to avoid
corrosion damage.
•
If the amplifiers are shipped insurance is
desirable due to the high unit value.
UK LTD
or
similar for
Page 9
Advertisement
Table of Contents
