Advertisement
Thank you for purchasing one of our amplifiers. We
hope you will be pleased with it.
Icon Audio guarantee this amplifier for 12 months
from the date of purchase for parts and labour.
This includes valves at Icon Audio's discretion.
Keep your receipt as proof of purchase.
All units are individually tested for performance for at
least six hours before despatch to you. In the unlikely
event that you believe the unit is not functioning
correctly, it may be helpful to contact us first as we
may be able to assist you. Then we would request
that you return the item to us for further action.
You are advised to inform us of any change of
address in order that we may keep you up to date of
any upgrades or improvements. Check our website.
Exclusions
Claims for any damage to either amplifiers or valves
must be reported within three days of receipt.
Valves are classed as consumables. The 12 month
guarantee covers premature failure and not wear and
tear. Therefore our guarantee will cover a reducing
percentage of the cost of replacement based upon a
12 month period.
LEDs used for aesthetic and décor purposes are not
covered.
11/02/2020 G Version
8 Guarantee
icon Audio
351 Aylestone Road Leicester LE2 8TA
www.iconaudio.co.uk
Phone 07787 158791
Fax 0116 244 0593
This amplifier is designed for normal domestic hi fi
use. It is not guaranteed for commercial, Public
Address use, or use in other situations. The
guarantee becomes void if the unit has been
modified in any way not approved by Icon Audio.
9 Packing Instructions
It is essential that the original box and packing be
kept in good condition, as this provides vital
protection during transit. Please do not write on
box, but use removable labels. Should the original
box and packaging be lost or become unusable a
repacking charge of one hundred pounds will be
made. If you have any doubts about this please
contact us.
•
Re-use the supplied plastic bag to keep the
amp clean and free from damp.
•
The mains lead fits in a foam cut-out
underneath the amplifier.
•
Insert the piece of cardboard or pieces of
foam between the transformer cover and
the valve guard; this will prevent the valve
cover
damaging
paintwork.
•
Remove the valves and pack in original
boxes and packing.
•
If stored in the box, keep upright.
the
transformer
Page 8
Advertisement
