Barthelme CHROMOFLEX RC Manual page 4

CHROMOFLEX RC - Radio Remote Control - Manual - English V1.01 - www.barthelme.de
Remark: The Remote Control can also be configured for a „No Echo" mode. In this mode the Remote Control is working like
a „traditional remote control" and no reply from the modules is expected. Using the „No Echo" mode only makes sense if
several Chromoflex RC modules are operated without a „Master" in one network.
Technical Data
Radio frequency: 868.3 Mhz (license free in EC, Switzerland, Norway and Iceland)
Batteries: 2 batteries, type „Lady" /„LR03" /„AAA" with 1.5 Volt (Alkaline)
Contact / Internet
Download of the PC Software, manuals, data sheets and technical requests (technical requests only as E-mail please!):
www.chromoflex.com , www.barthelme.de
Manufacturing and distribution:
www.barthelme.de
Setup of the Remote Control
In the setup mode (pressing SHIFT for > 4 sec), a 5-digit code must be entered, using the buttons COL+ and Col-. Please
press the buttons COL+ / COL- according to the following table. We recommend to use the modes with „Echo". Only if
several modules are operated without a „Master" in one network, the mode „No Echo" makes sense. The factory setup is
„Network 8, Echo":
No: Code Col+/- Explanation
0: - - - - -
1: - - - - +
2: - - - + -
3: - - - + +
4: - - + - -
5: - - + - +
6: - - + + -
7: - - + + +
8: - + - - -
9: - + - - +
10: - + - + -
11: - + - + +
12: - + + - -
13: - + + - +
14: - + + + -
15: - + + + +
16: + - - - -
17: + - - - +
18: + - - + -
19: + - - + +
20: + - + - -
21: + - + - +
22: + - + + -
23: + - + + +
24: + + - - -
25: + + - - +
26: + + - + -
27: + + - + +
28: + + + - -
39: + + + - +
30: + + + + -
31: + + + + +
No Echo, Normal (Any module), Net 1
No Echo, Normal (Any module), Net 2
No Echo, Normal (Any module), Net 3
No Echo, Normal (Any module), Net 4
No Echo, Normal (Any module), Net 5
No Echo, Normal (Any module), Net 6
No Echo, Normal (Any module), Net 7
No Echo, Normal (Any module), Net 8
No Echo, Only master, Net 1
No Echo, Only master, Net 2
No Echo, Only master, Net 3
No Echo, Only master, Net 4
No Echo, Only master, Net 5
No Echo, Only master, Net 6
No Echo, Only master, Net 7
No Echo, Only master, Net 8
Echo, Normal (Any module), Net 1
Echo, Normal (Any module), Net 2
Echo, Normal (Any module), Net 3
Echo, Normal (Any module), Net 4
Echo, Normal (Any module), Net 5
Echo, Normal (Any module), Net 6
Echo, Normal (Any module), Net 7
Echo, Normal (Any module), Net 8 (** Factory Default **)
Echo, Only master, Net 1
Echo, Only master, Net 2
Echo, Only master, Net 3
Echo, Only master, Net 4
Echo, Only master, Net 5
Echo, Only master, Net 6
Echo, Only master, Net 7
Echo, Only master, Net 8
- 4 -
Subject to technical modifications
Rev 15.03.2008