Transporting And Storing The Printer - Epson SC-P900 Series User Manual

Maintaining the Printer
Important:
c
❏ Do not turn off or unplug the printer until the update is complete. Doing so may result in malfunction of the
printer.
❏ If the firmware update is not completed or is unsuccessful, the printer does not start up normally and
"Recovery Mode" is displayed on the LCD screen the next time the printer is turned on. In this situation, you
need to update the firmware again using a computer. Connect the printer to the computer with a USB cable.
While "Recovery Mode" is displayed on the printer, you cannot update the firmware over a network
connection. On the computer, access your local Epson website, and then download the latest printer
firmware. See the instructions on the website for the next steps.

Transporting and Storing the Printer

When you need to store the printer or transport it when moving or for repairs, follow the steps below to pack the
printer.
1. Turn off the printer by pressing the
2. Make sure the power light turns off, and then unplug the power cord.
Important:
c
Unplug the power cord when the power light is off. Otherwise, the print head may not return to the home
position causing the ink to dry, and printing may become impossible.
3. Disconnect all cables such as the power cord and USB cable.
4. Remove all of the paper from the printer.
5. Open the printer cover. Secure the print head to the case with tape.
>

Transporting and Storing the Printer

P
button.
112