Advertisement
Quick Links
CEILING MOUNT BRACKET SAFEGUARDS
The projector and the ceiling mount bracket are designed sufficiently safety though, make sure the safety cable provided
with the projector is installed and attached to the bottom of the projector when mounting in the ceiling for safety and security.
NOTE:
•
Even if it is guarantee period, the manufacturer is not responsible for any hazard or damage caused by using a ceiling mount
bracket which is not purchased from an authorised distributors, or environmental conditions.
•
Make sure to use a torque driver and do not use an electrical screwdriver or an impact screwdriver.
•
Installation work of the ceiling mount bracket should only be carried by a qualified technician.
•
Remove an unused ceiling mount bracket promptly.
Installing the safety cable
1. Install the ceiling mount bracket according to the Installation Instructions.
2. Loop the security cable around the ceiling mount bracket with less slack.
•
Lace the cable of the end with a latch through the loop on the other end of the cable.
3. Attach the latch on to the bottom of the projector with a provided screw.
•
Torque: 125±20 N·cm
TQDJ19046
Advertisement
Related Manuals for Panasonic PT AE1000E
Summary of Contents for Panasonic PT AE1000E
- Page 1 CEILING MOUNT BRACKET SAFEGUARDS The projector and the ceiling mount bracket are designed sufficiently safety though, make sure the safety cable provided with the projector is installed and attached to the bottom of the projector when mounting in the ceiling for safety and security. NOTE: •...
- Page 2 ERRATA Opening the top cover (Operating Opening the top cover Instructions page 42) (Operating Instructions page 42) 1. Turn off the MAIN POWER switch according to the procedure “Switching the projector on/off” on page 19 1. Turn off the MAIN POWER switch and disconnect the mains plug from the mains socket.
- Page 3 CEILING MOUNT BRACKET SAFEGUARDS The projector and the ceiling mount bracket are designed sufficiently safety though, make sure the safety cable provided with the projector is installed and attached to the bottom of the projector when mounting in the ceiling for safety and security. NOTE: •...
- Page 4 ERRATA Opening the top cover (Operating Opening the top cover Instructions page 42) (Operating Instructions page 42) 1. Turn off the MAIN POWER switch according to the procedure “Switching the projector on/off” on page 19 1. Turn off the MAIN POWER switch and disconnect the mains plug from the mains socket.