Tv And Video Recoder (Vcr); Ntsc Playback; Search For And Store The Test Signal Of The Video Recorder; Camera And Camcorder - Sharp 21LF-90H Operation Manual

Hide thumbs Also See for 21LF-90H:
Table of Contents

Advertisement

Connect a decoder with an aerial socket
to the TV
• Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
• Connect the decoder to your TV with a

TV and Video Recoder (VCR)

• Connect the aerial cables.
Better picture quality can be obtained if you
also connect a eurocable to

NTSC Playback

Connect NTSC VCR player through SCART
socket at the back of the TV or through RCA
Jack at the front of the TV.
Then, press “
F-AV.
Search for and store the test signal
of the video recorder
• Unplug the aerial cable from the aerial
• Switch on your TV and put the video recorder
• Enter the Tuning menu via the Install menu.
• Search for the test signal of your video re-
• Replace the aerial cable in the aerial socket
ENG-2163-1548 UK-PAL-TEK SCART-FAV-STEREO-SHARP-AK44-TV2.p65
Downloaded from:
http://www.usersmanualguide.com/
eurocable (RCA Jack Cable) to
socket.
When your decoder has a Euro
connector / RCA Jack you can obtain better
picture quality if you connect a eurocable
(RCA Jack Cable) to
SCART socket.
SCART socket.
(;7
“ button to select SCART or
socket “ANT” of your video recorder.
on the test signal. (See the handbook for
your video recorder.)
corder in the same way as you searched for
and stored the TV signals. See Tuning,
Search and Store TV channels. Store the
test signal under programme number 0.
“ANT” of your video recorder once you have
stored the test signal.
22

Camera and Camcorder

To connect to Front-AV input
Connect your camera or camcorder at the
front side of your TV.
• Connect your equipment to the TV via VIDEO
(yellow), AUDIO R (red) and AUDIO L (white)
SCART
inputs. You should connect the jacks to the
input in the same colour.
Connect the decoder to the video
recorder
Some video recorders have a special
euroconnector for decoder.
• Connect a eurocable to the euroconnector of
your decoder and to the special eurocon-
nector of your video recorder. See also the
handbook of your video recorder.
• To connect your video recorder to the TV, see
TV and Video Recorder section.
If you want to connect more equipment to
your TV, consult your dealer.

Connecting Headphones

Use the stereo headphone socket (HP) on
the lower front / right side of your TV, to con-
nect headphones.
- 22 -
06.01.2004, 15:37
(F- AV)
:

Advertisement

Table of Contents
loading

Table of Contents