Other Features; Tv Status; Flash Back ( ); Double-Digit (- / - -) - Sharp 21LF-90H Operation Manual

TV Status

Programme Number, Programme Name
(or AV), (they are displayed on the upper left
of the screen) and Sleep Timer (shows the
time left on the upper right screen if en-
abled). In stereo options the sound indicator
is displayed with them too. They are dis-
played after programme change during 3
seconds.
These OSD’s are displayed when a new
programme is entered by digit button, by
pressing "
CH ” button, or by “ 79 ” button.
Flash back (
This button is used to return to the previous
viewed preset. By pressing the "
repeatedly it is possible to toggle between
two presets.

Double-digit (- / - -)

This OSD is displayed when the "- / - -" but-
ton pressed in place of the programme
number indicator.
ENG-2163-1548 UK-PAL-TEK SCART-FAV-STEREO-SHARP-AK44-TV1.p65
Downloaded from: http://www.usersmanualguide.com/

Other Features

Programme Number
Programme Name (5 characters)
" button, or by “ P/CH+“ or “ - P/
)
18
After then, in order to enter a programme it
must be pressed to two digit consecutively.
When it is late to press any digit button this
function will be ignored and the display will
be erased. In the same way it must not be
late to press any digit button after entering
the first digit. The limit of the delay time is 3
seconds.

Sound Indicator

This is a stereo option. The alternatives of
the indicator are Mono, Stereo, Dual I and
Dual II. This indicator is displayed under the
programme number indicator on the screen.
"I-II" button is used to select Mono or Stereo,
or Dual I or Dual II.
In Mono broadcast or in forced-mono (for
stereo broadcast).
In Stereo broadcast.
If dual broadcast detected. Dual I is selected
in default and also can be selected after
" button
Dual II by Remote Control.
If Dual II selected by Remote Control.

Picture Mode

The picture mode OSD is displayed below
the sound indicator, by TV Status OSD’s. Ac-
cording to the WSS data, inside of the OSD
box “4:3” , “16:9” or “Auto” is written.
By pressing “
(if Teletext is not active) the picture mode
can be switched into 4:3, 16:9 or Auto Mode.

Sleep Timer Last Minute Indicator

It is displayed on the upper right of the
screen. If sleep timer is activated it is dis-
played with the TV status and erased with it
after 3 seconds.
- 18 -
06.01.2004, 15:37
”wide mode button.