The Remote Control - LDLC Touch C1 User Manual

the reMote Control

1. Power off the camera, press and hold for 5 seconds the photo button
will turn on.
2. Press and hold the photo button
Remote ON / OFF
Camera ON / OFF
Take a picture
Take a video
*Turn off both the camera & remote to shut down this function.
Remote Status Indicator Lights :
Green
Red
Blue
Red
* LED turns OFF when battery is fully charged
Preventing water damage to your camera :
1. Keep the rubber seal clean with fresh water and dry after every use.
2. After every use in salt water, please rinse the housing with fresh water.
3. Clean the seal, rinse in fresh water and shake dry.
*Failure to follow these steps each time you use the camera can result in leaks that may damage or destroy your
camera. Your warranty does not cover water damage resulting from this user error.
for 5 seconds, the green light will turn on.
Status Indicator Lights
Camera ON/OFF
Vidéo button
Photo button
Blue light on
Remote ON/OFF
Press and hold the photo button
Press the power button
Press the photo button
Press the video button
Power on
Take a picture
Take a video
Charging*
, the blue light
Blue
Red
Green
for 3 seconds
52