Download Print this page

Specifications - Makita 2705 Instruction Manual

Hide thumbs

Advertisement

Table of Contents
ENGLISH (Original instructions)

SPECIFICATIONS

Blade diameter
Riving knife-related specs.
Max. cutting capacities
Maximum dado capacity
No load speed (RPM)
Table size (L x W)
Dimensions (L x W x H) with table not extended
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
For Your Own Safety Read
Instruction Manual
Before Operating Tool
Save it for future reference
GENERAL SAFETY
PRECAUTIONS
(For All Tools)
1.
KNOW YOUR POWER TOOL. Read the owner's
manual carefully. Learn the tool's applications
and limitations, as well as the specific poten-
tial hazards peculiar to it.
2.
KEEP GUARDS IN PLACE and in working order.
3.
REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see that keys and
adjusting wrenches are removed from tool
before turning it on.
4.
KEEP WORK AREA CLEAN. Cluttered areas
and benches invite accidents.
5.
DO NOT USE IN DANGEROUS ENVIRONMENT.
Do not use power tools in damp or wet loca-
tions, or expose them to rain. Keep work area
well lighted. Do not use tool in presence of
flammable liquids or gases.
6.
KEEP CHILDREN AWAY. All visitors should be
kept safe distance from work area.
7.
MAKE WORKSHOP KID PROOF with padlocks,
master switches, or by removing starter keys.
8.
DO NOT FORCE TOOL. It will do the job better
and safer at the rate for which it was designed.
Model
Arbor hole
Blade body thickness
Riving knife thickness
Blade diameter
Kerf width
90°
45°
Net weight
Max.255 mm (10") - Min.250 mm (9-7/8")
567 mm x (753 mm - 1,066 mm)
22-1/4" x (29-5/8" - 42")
678 mm x 766 mm x 344 mm
(26-3/4" x 30-1/4" x 13-1/2")
9.
USE RIGHT TOOL. Do not force tool or attach-
ment to do a job for which it was not designed.
10. WEAR PROPER APPAREL. Do not wear loose
clothing, gloves, neckties, rings, bracelets, or
other jewelry which may get caught in moving
parts. Nonslip footwear is recommended. Wear
protective hair covering to contain long hair.
11.
ALWAYS USE SAFETY GLASSES. Also use
face or dust mask if cutting operation is dusty.
Everyday eyeglasses only have impact resis-
tant lenses, they are NOT safety glasses.
12. SECURE WORK. Use clamps or a vise to hold
work when practical. It's safer than using your
hand and it frees both hands to operate tool.
13. DO NOT OVERREACH. Keep proper footing
and balance at all times.
14. MAINTAIN TOOLS WITH CARE. Keep tools
sharp and clean for best and safest perfor-
mance. Follow instructions for lubricating and
changing accessories.
15. DISCONNECT TOOLS before servicing; when
changing accessories such as blades, bits,
cutters, and the like.
16. REDUCE THE RISK OF UNINTENTIONAL
STARTING. Make sure switch is in off position
before plugging in.
17. USE RECOMMENDED ACCESSORIES. Consult
the owner's manual for recommended acces-
sories. The use of improper accessories may
cause risk of injury to persons.
18. NEVER STAND ON TOOL. Serious injury could
occur if the tool is tipped or if the cutting tool
is unintentionally contacted.
2 ENGLISH
2705
15.88 mm (5/8")
255 mm (10")
1.8 mm (1/16")
2.3 mm (3/32")
2.6 mm (3/32")
91 mm (3-9/16")
63 mm (2-1/2")
21 mm (13/16")
4,800/min.
29 kg (64 lbs)

Advertisement

Table of Contents
loading

  Also See for Makita 2705

  Related Manuals for Makita 2705