Table of Contents
Advertisement
Other Control Settings
Display Information
When you adjust the controls or settings of the Duo the display shows information and symbols related to
what you are doing. After a few seconds the display goes back to showing the time or the source you are
listening to. You can select which of the default displays you want.
Using the Front Panel Controls
1
Turn the
control to
MODE
highlight the Info icon of the
display.
2
Turn the
control to select
MODE
the Source display or the Time
display. Press the
control to
MODE
set the default display.
Using the Remote Control
Press the
button to switch
INFO
between Source or Time display.
If the display default was set to show
the Time the icon for the currently
selected source fl ashes a few times. The display now defaults to show the Source.
If the display default was set to show the Source the clock icon fl ashes a few times. The display now defaults
to show the Time. Note that the icon for the current source displays in addition to the time.
In the example shown above the default display is set to Time and the source is FM1.
Display Brightness
The display brightness varies automatically with changing light conditions. In addition the overall range of
the display brightness can be adjusted to suit personal preference.
1
Turn the
control to highlight the Brightness icon.
MODE
2
Press the
control. The Brightness icon and the current
MODE
brightness setting will fl ash.
3
Turn the
control to adjust the brightness setting. The
MODE
setting can range from 1 – 20.
4
Press the
control again to set the new display
MODE
brightness setting. The brackets around the Brightness icon
fl ash a few times. Then the display reverts to its previous state.
In this example the brightness is set to 12.
12
Hide quick links:
Advertisement
Table of Contents
