Selecting A Source; Tuning In A Radio Station - Boston Acoustics AM/FM Radio Tuner Owner's Manual

Selecting a Source

Using the Front Panel Controls
1
Turn the control until the
MODE
source you want is highlighted
with brackets. Note that other
function and alarm setting control
icons also may be selected.
2
Press the control to select
MODE
the highlighted item. Or just wait
a few seconds and the source
is automatically selected. The
Duo begins playing the source
selected.
Using the Remote Control
Press the button for the source
you want to select. Press the
Notes:
• There are FM 1 and FM 2 source options. They correspond to the two FM radio preset groups.
• There are Aux 1 and Aux 2 source options. Aux 1 is the front panel input. The Aux 2 input is on the rear
panel.

Tuning In a Radio Station

Using the Front Panel Controls
1
Use the control to select
MODE
the AM radio source or one of the
FM radio sources.
2
Turn the control until the
TUNE
station frequency you want shows
in the display.
Using the Remote Control
1
Press the or radio source
AM FM
button.
[ ]
2
Press the or button once
to step up or down the radio band
to the next station frequency.
Notes:
• If the radio source you want is already selected you can skip step
[ ]
or the remote or buttons to tune in a new station.
• If the station you select has been assigned to a station preset, the preset indicator and number are
displayed.
and buttons once for FM 1 or AUX 1 and twice for FM 2 or AUX 2.
FM AUX
1
and use the front panel
TUNE
control
7