Related Manuals for Boston Acoustics Recepter
Summary of Contents for Boston Acoustics Recepter
- Page 1 Recepter Radio ® Owner ’s Manual Shown with second speaker for stereo operation.
- Page 2 IMPORTANT SAFETY INSTRUCTIONS spilled or objects have fallen into the apparatus, the apparatus This symbol found on the apparatus indicates hazards has been exposed to rain or moisture, does not operate normally, arising from dangerous voltages. or has been dropped. Maintain a minimum distance of 2"...
- Page 3 In addition to greatly enhanced digital quality sound, HD Radio stations will soon broadcast multiple channels and data simultaneously on their same, familiar position on the radio dial. The Recepter Radio HD sorts it all out to bring you your favorite current programming, or new and expanding choices –...
-
Page 4: The Control Panel
The Recepter Radio HD also features an auxiliary input that allows the connection of any device with a headphone output. Simply connect the device to the "... -
Page 5: Connecting The Power Cord
Be sure to keep the power supply away from the Radio while in use, as it may cause interference. Note: The Recepter Radio HD is not designed for automotive use. Connecting the FM antenna wire The FM antenna comes attached. If the antenna is disconnected or you wish to attach an external indoor FM antenna, follow these steps: 1. -
Page 6: Connecting Headphones
Remote Control. Adjusting the volume Turn the Volume knob on the Recepter Radio HD or press the + or – buttons on the remote to adjust the volume. When the Radio is turned on, the volume will return to the previous setting unless it was very loud,... -
Page 7: Muting The System
Muting the system Pressing the Mute button on the Remote Control will mute all sound. The Radio will remain silent until the Mute button or a volume control is used. Turning off the Radio will also cancel the mute command. Radio –... - Page 8 HD recognizes an HD Radio channel, the HD Radio logo starts blinking until ® the signal is tuned in. After the Recepter Radio HD is tuned to an HD channel, arrows will appear on the right side of the display. The arrows will indicate the existence of multicast services. Use the Tuning knob to select the multicast channels.
-
Page 9: Setting The Alarms
Alarms Setting the alarms 1. Press the Alarm 1 or Alarm 2 button to choose the desired alarm mode — one press for Music , two presses for Tone , and three presses to turn it off. The display will indicate if an alarm is set and its mode of operation. -
Page 10: More Features
The bright display mode is the default setting. Tap the Dim/Setup button to change the display from dim to medium or bright. Bass Trim When the Recepter Radio HD is near a wall, the bass may be more pronounced. ®... -
Page 11: Other Connections
Other Connections Connecting the Recepter Radio ® HD to a cable radio signal The Radio’s FM antenna connector is a standard “F” connector and will accept the cable FM feed from most cable systems that provide FM programming. To connect your radio to the FM signal available from some cable TV providers, contact your cable TV provider for assistance. -
Page 12: Limited Warranty
Limited Warranty For one year from the date of purchase, Boston Acoustics will repair for the original owner any defect in materials or workmanship that occurs in normal use of the Recepter Radio ® HD, without charge for parts and labor.