Table of Contents
Advertisement
Other Control Settings
Display Information
When you adjust the controls or settings of the Solo the display shows information and symbols related to what you are
doing. After a few seconds the display goes back to showing the time or the source you are listening to. You can select which
of the default displays you want.
Turn the
control to highlight the Info icon of the display.
1
MOde
Press the
control. The information in the display flashes.
2
MOde
Turn the
control. The display will toggle between the source display and
3
MOde
the time display.
When the display shows default you want press the
4
This example shows the display after step
flashing..
Display Brightness
The display brightness varies automatically with changing light conditions. In addition the overall range of the display
brightness can be adjusted to suit personal preference.
Turn the
control to highlight the Brightness icon.
1
MOde
Press the
control. The Brightness icon and the current brightness setting
2
MOde
will flash.
Turn the
control to adjust the brightness setting. The setting can range
3
MOde
from 1 – 20.
Press the
control again to set the new display brightness setting. The
4
MOde
brackets around the Brightness icon flash a few times. Then the display reverts to
its previous state.
In this example the brightness is set to 12.
Connecting Other Equipment
Connecting Headphones
Connect the headphone plug to the jack on the front panel. This turns off the Solo internal speaker. If your headphones have
the old-style large plug you will need an adapter.
Using the Aux Input
Other audio equipment, such as an iPod or a portable CD player, can be connected to the Solo through the rear panel Aux
input. You will need a cable with a stereo mini plug on both ends. Select the Aux input using the
in the "Selecting a Source" section on page 5.
control.
MOde
. The information in the display will be
1
control as described
MOde
9
Hide quick links:
Advertisement
Table of Contents
