Figure 19. Installing the storage drive bracket
4. Connect the storage drive cable to the system board.
5. Complete the replacement. See "Completing the parts replacement" on page 53.
Replacing the internal speaker
Attention: Do not open the computer or attempt any repair before reading and understanding "Read this
first: Important safety information" on page v in this document.
1. Remove the computer cover. See "Removing the computer cover" on page 27.
2. Disconnect the internal speaker cable from the internal speaker connector on the system board.
3. Replace the internal speaker.
Figure 20. Removing the internal speaker
30
M710q Hardware Maintenance Manual