Page 1
Aufbauanleitung / assembly instructions mod. 6645-6648_6655-6658_mit_Frontauszug M10 x 20 M10 x 30 M6 x 35 1. Montagematerial 2. Die Plattenträgerwanne auspacken und umge- 1. fitting material dreht auf gepolsterten Montageböcken ab- legen. 2. Put the metal holding-plate upside down onto padded assembling trestles.
Page 2
Take away again the two cardboard stripes. 7. Put the table-base onto the floor where it will be used later. Please avoid to get scratches at the backside of the table-base by using cardboard stripes. 2 / 3 6645-6648_6655-6658_mit_Frontauszug Änderungsdatum: 05.02.16...
Page 3
9. Turn in 7 screws at both sides to connect the beiden Seiten der schwarze Bremshebel table-top to the table-base. gelöst werden. 10. Release the black brake handles at both sides before the table can be pulled out. 11. Fertiger Esstisch. 11. Finished table. 3 / 3 6645-6648_6655-6658_mit_Frontauszug Änderungsdatum: 05.02.16...