FORM FIT HD 10M18 Accessory Installation

Accessory Installation
Instructional Symbols / Definitions
Denotes warnings that may lead to serious
physical injury or vehicle damage.
Denotes cautions to be taken to avoid physical
injury or electronic component damage.
Denotes cautions to be taken to avoid vehicle
and component damage.
Basic Required Hand Tools
#2 Phillips Screwdriver
with LONG SHANK
HD 10M18
Vehicle Model
Model Year
Part No.
Note: Difficulty stated above reflects the minimum level of expertise required to install the accessory.
( A ) Customer
Clean Cloth Masking tape
FormFit Hood Protector
Hyundai Elantra GT
2018 - up
HD 10M18
( B ) Dealer Technician ( C ) Master Technician
Denotes quality processes to be
checked prior to moving to the next
step.
Denotes specific tools that are
necessary to complete the step.
Denotes instructional steps
necessary to complete the process.
Notes to the Installer:
Read the entire installation manual prior to beginning the installation of the
accessory.
To prevent vehicle damage, never place tools on top of painted surfaces,
seats, dash pad, console or floor carpet / mat.
Always wear appropriate safety gear to include gloves and eye protection
when required.
Make sure the vehicle is clean and completely dry before installation.
Make sure the vehicle is at room temperature or warmer: 15° to 43°C (60° to
110°F) before starting installation and that it remains at room temperature for
1 hour afterward to develop maximum adhesion of the 3M tape to the
vehicle's surface.
Rev0.May 11, 2018
Accessory
Hood Protector
Difficulty
Denotes safety equipment required to be used
such as a mask, safety glasses, gloves, and
hearing protection.
Safety Glasses
Mask
Gloves Hearing Protection
page 1 of 9
(B)