Project 14: Joystick - Keyestudio EASY PLUG Ultimate Starter Kit Manual

Project 14: Joystick

Overview
Lots of robot projects need joystick. This joystick module provides an
affordable solution. In the following, we are going to test the joystick.
Component Required:
 EASY plug control board*1
 EASY plug Joystick Module *1
 EASY plug LED module *3
 RJ11 cable *4
 USB cable*1
Component Introduction:
It also has a switch that is connected to a digital pin.
This joystick module can be easily connect to EASY PLUG control board with
only one cable.
 Interface: Easy plug
 Supply Voltage: 3.3V to 5V
 Interface: Digital
EASY plug Joystick Module
Lots of robot projects need
joystick. This module provides an
affordable solution.
By simply connecting to two
analog inputs, the robot is at your
commands with X, Y control.
www.keyestudio.com
171