Project 15: Ambient Light - Keyestudio EASY PLUG Ultimate Starter Kit Manual

Project 15: Ambient Light

Overview
This project we will test the ambient light. You can use analog reading to
read the data from this sensor.
Component Required:
 EASY plug control board*1
 EASY plug TEMT6000 Light Sensor *1
 EASY plug LED module *1
 EASY plug RGB module *1
 RJ11 cable *2
 USB cable*1
Component Introduction:
room or ambient light in a space.
This EASY plug TEMT6000 light sensor uses a special ambient light detector
(TEMT6000) with spectral response that closely emulates the human eye.
It does react well to very small changes in a wide range of brightness,
however, it does not react well to IR or UV light.
The sensor can help you to to detect the light density.
EASY plug TEMT6000 Ambient Light
Sensor
Light sensors are probably one of the most
common sensors in life. They can be found
in your laptop, phone or home lighting
system.
A light sensor measures the level of light in a
www.keyestudio.com
179