Transportation, Storage And Disposal - Husqvarna 120i Operator's Manual

LED display
Warning indicator flashing.
Green activate LED flashing.
Warning indicator lit.
Table 2: Battery
Troubleshooting the battery and/or the battery charger during charging.
LED display
Warning indicator flashing.
Warning indicator lit.
Table 3: Battery charger
LED display
Warning indicator flashing.
Warning indicator lit.
Transportation and storage
• The supplied Li-ion batteries obey the Dangerous
Goods Legislation requirements.
24
Possible faults
Chain brake engaged.
Temperature deviation.
Overload. Cutting attachment jam-
med.
The power trigger and the activate
button are pressed at the same time.
Low battery voltage.
Service.
Possible faults
The battery is discharged.
Temperature deviation.
Over voltage.
Cell difference is too much (1V).
Possible faults
Temperature deviation.

Transportation, storage and disposal

Possible action
Pull back the front hand guard to re-
lease the chain brake.
Allow the product to cool down.
The cutting attachment is jammed.
Release the cutting attachment.
Release the power trigger and the
product is active.
Charge the battery.
Turn to your servicing dealer.
Possible action
Charge the battery.
Use the battery in surroundings
where tempereatures are between
-10 °C/14°F and 40°C/104°F.
Check that the mains voltage corre-
sponds with that stated on the rating
plate on the product.
Remove the battery from the battery
charger.
Turn to your servicing dealer.
Possible action
Use the battery in surroundings
where temperatures are between
5°C/41°F and 40°C/104°F.
Turn to your servicing dealer.
• Obey the special requirement on package and labels
for commercial transportation, including by third
parties and forwarding agents.
1259 - 001 - 11.07.2019