Table Of Contents; Introduction - Husqvarna 120i Operator's Manual

Introduction..................................................................... 8
Safety..............................................................................9
Assembly...................................................................... 15
Operation...................................................................... 15
Maintenance................................................................. 20
Product description
This product is a chainsaw model with an electric motor.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Product overview
(Fig. 1)
1. Front hand guard
2. Keypad
3. SavE button
4. Warning indicator
5. Start/stop button
6. Power trigger lockout
7. Rear handle with right hand guard
8. Fan housing
9. Chain oil tank
10. Battery charger
11. Power cord
12. Warning indicator
13. Connector
14. Operator's manual
15. Guide bar cover
16. Drive sprocket cover
17. Chain tensioner wheel
18. Knob
19. Chain catcher
20. Spiked bumper
21. Bar tip sprocket
22. Saw chain
23. Guide bar
24. Front handle
25. Power trigger
26. Battery
27. Battery release buttons
28. Battery status
29. Button, battery status
30. Warning indicator
8
Contents
Troubleshooting............................................................ 23
Transportation, storage and disposal........................... 24
Technical data.............................................................. 25
Accessories.................................................................. 26
EC Declaration of Conformity....................................... 28

Introduction

Intended use
This product is intended for sawing in wood.
Note: National regulations can set limit to the operation
of the product.
Symbols on the product
(Fig. 2)
(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 6)
(Fig. 7)
(Fig. 8)
(Fig. 9)
(Fig. 10)
(Fig. 11)
Risk of serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the operator's manual carefully and
understand the instructions before operation
of the product.
Wear approved protective helmet, hearing
and eye protection.
This product agrees with applicable EC
Directives.
Noise emissions to the environment
according to European Directive 2000/14/EC
and New South Wales legislation "Protection
of the Environment Operations (Noise
Control) Regulation 2017". Noise emission
data can be found on the machine label and
in the Technical data chapter.
Both of the operator's hands must be used
to operate the chainsaw.
Do not operate the chainsaw holding it with
one hand only.
Do not let the guide bar tip touch all objects.
Warning! Kickback can occur when the
guide bar tip touches an object. This causes
the guide bar to be thrown in the direction of
the operator. Risk of serious injury or death.
The direction in which the saw chain rotates
and maximum length of the guide bar.
1259 - 001 - 11.07.2019