Table of Contents
Advertisement
Therm-App MD™ Pro User Manual
1.2.
Therm-App MD™ PRO User Manual
For updated user manual refer to the following web site:
https://www.opgal.com/products/therm-app-MD-pro
1.3.
Software updates
For software updates refer to the following web site:
https://www.opgal.com/products/therm-app-MD-pro
2. Safety Instructions
•
Keep the system out of the reach of young children.
•
Use only the original power supply.
•
Do not disassemble or modify the system.
•
Do not expose the system to strong shocks or vibrations.
•
Do not touch any exposed internal components.
•
Do not use organic solvents such alcohol, benzine or other thinners to clean the system.
•
Do not get the product wet.
•
Do not insert foreign objects or liquids into the product.
•
Do not use the system where flammable gases may be present (This may cause an electric shock,
explosion or a fire).
•
If not in use, do not leave the lens exposed without the lens cap attached.
•
Do not touch the system while it is connected to a power outlet during lighting storms (This may cause
electric shock).
•
Do not place any objects on the power cord or any other system parts.
•
Do not unplug the product by pullin the power cord.
•
The computer itself produces heat – During use, do not allow the computer to be in contact with human
skin for extended periods of time. It is recommended to hold the computer only from the side panels
when turned on.
•
Do not touch the product with wet hands.
•
Do not expose the system to extremely high or low temperatures
•
Mount the camera only on a tripod using a quarter inch screw of with the adjustable clamp
•
Do not expose the system to direct sunlight
Confidential Opgal Propriety
Page 2-5 of 43
Document P/N UM-TAH00AQ-MD-PRO| Rev B
Advertisement
Table of Contents
