Therm-App MD™ Pro User Manual
9. Browser Support
You can use the Therm-App MD™ Pro by using the following Browsers:
Operating System
Windows®
10.
Access the device
How to find Therm-App MD™ Pro device on the network and assign IP addresses in Windows:
1)
At the first you must set the same IP address subnet on your PC.
2)
In Windows 10 open the Network and Internet Settings.
3)
Select Ethernet and then open Change adapter options.
4)
Perform right mouse button click on the Ethernet icon. and select the Properties menu.
5)
Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
6)
Select Use the following IP address and fill in the IP address, Subnet mask and the Default gateway as
shown in the example below.
7)
Open Google Chrome™ browser and enter the IP address.
8)
The default IP address is 192.168.0.100
Confidential Opgal Propriety
Google Chrome™
Recommended
Page 10-10 of 43
Firefox
®
X
Document P/N UM-TAH00AQ-MD-PRO| Rev B
Edge
®
X