Therm-App MD™ Pro User Manual
Press APPLY to save or CANCEL to dismiss the changes.
13.1.4.
HTTPS Connection Section
Please Note: This option is applicable when either selecting a self-signed certificate or uploading an existing
certificate.
Press on HTTPS Connection in the Settings page to expand the HTTPS Connection section.
Set the HTTPS Port slider to the desired value (1 to 65535).
Note: The HTTPS Port default value is 443.
Press APPLY to save or CANCEL to dismiss the changes.
Page 13-20 of 43
Confidential Opgal Propriety
Document P/N UM-TAH00AQ-MD-PRO| Rev B