Installing Storage Drives - Asus V6 Series Installation Manual

Installing storage drives

Optical drive
1. Place the chassis u�right, then
remove the u��er 5.25" drive bay
metal �late cover.
2. Insert the o�tical drive to the bay, then
carefully �ush the drive until its scre�
holes align �ith the holes on the bay.
3. �ecure the o�tical drive �ith t�o scre�s on both sides of the bay.
4. For �ATA ODD: Connect the �ATA
signal and �o�er �lugs to the
connectors at the back of the drive.
For IDE ODD: Connect the IDE and
�o�er �lugs to the connectors at the
back of the drive.
Floppy disk drive
If the system comes �ithout a �ortable hard disk �o�tional�, then you may install a
floppy disk drive into the 3.5-inch drive bay.
1. Place the chassis u�right, then
remove the u��er 3.5" drive bay metal
�late cover.
2. Insert the floppy disk drive to the bay,
then carefully �ush the drive until its
scre� holes align �ith the holes on the
bay.
3. Secure the floppy disk drive with two
scre�s on both sides of the bay.
4. Connect the signal �A� and �o�er ����
�lugs to connectors at the back of the
drive.
Hard disk drive
1. Remove the 3.5-inch hard drive holder out of the chassis.
NOTE: The
2. Insert the hard disk drive to the 3.5-inch hard drive holder, then carefully �ush
the drive until its scre� holes align �ith the holes on the holder.
1
A6358_V_�eries_Q�G_V2.indb 12
3.5-inch hard drive holder is o�tional.
Installation manual
3
SATA IDE
4
3
A
2
3
3
2
��
1�26�11 1:37:�5 P�