Hisense DH5020K1G Use & Care Manual page 8

Fan Speed
1.
Press FAN to select fan speed
,
2. Choose LOW HIGH or AUTO
■ LOW-Reach the desired humidity setting
with lower sound level.
■ HIGH-Will more quickly reach the desired
humidity setting.
■ AUTO-Achieves set humidity at normal speed.
NOTE:
Once the relative humidity of the room hit the
desired setting, the compressor will stop and the
fan will be off periodically.
The fan may periodically turn on, to read the
humidity level, without the compressor running.
Desired Humidity-Mode
1. Press MODE to select the desired humidity setting.
2. Choose Auto Dry, Continuous or Manual Set.
■
AUTO DRY: The dehumidifier will operate in
dry mode only. The fan speed is set
automatically. The desired humidity is set to
50% automatically.
■
CONTINUOUS: The dehumidifier will operated
continuously. The fan speed can be adjusted.
The desired humidity can not be adjusted.
■
MANUAL SET: The dehumidifier will operate at
the selected fan speed to the set humidity level.
If the humidity level of the room is higher than
the desired humidity setting, the compressor will
turn on. If the humidity level of the room is lower
than the desired humidity setting, the
compressor will turn off, as well as the fan.
NOTE:
The de-icing function will turn off the compressor
if a low temperature condition occurs. When the
de-icer senses the correct operating temperature,
the compressor will cycle back on. Some freezing
is normal when dehumidifiers are used at low
temperatures.
.
.
7
Empty Bucket Light
If this light is on, the fan and the compressor will
stop running. This light indicates that you need
to check:
■ If the bucket is full, empty and re-install
bucket.
■ If the bucket is not in position, remove the
bucket and re-install it. Make sure the
bucket fits all the way into the dehumidifier
and the bucket light is off, or dehumidifier
will not run.
Power
Press POWER to turn on or turn off the dehumitifier.
Humidity Level
1. Press the Plus or Minus button to set the
desired humidity level. Desired humidity in
the digital display will flash for 5 seconds after
operation.
2. Actual room humidity will be displayed after
5 seconds of flashing the desired humidity.
NOTE:
Humidity can only be adjusted manually in
Manual Set mode. In Continuous and Auto
Dry mode, humidity level is set automatically.
Digital Display
Display shows relative humidity or time
(depending on setting).
1.When the dehumidifier operates in Manual
Set mode, the display shows the relative
humidity of the room.
2.When the timer is selected, the display shows
the time when the dehumidifier will turn on or
turn off operates, depending on the setting.
NOTE:
The humidity displayed is only for reference. For
accurate humidity, please check a hygrometer.
.