Epson Stylus Color 980 Manual page 220

2. Hold down the
to enter the default-setting mode.
The printer loads a sheet of paper and prints a brief summary
and instructions. It instructs you to select the language that
you want messages printed in (English, French, German,
Italian, Spanish, or Portuguese).
3. Press the
indicate the language of your choice, as shown below.
Language
English
French
German
Italian
Spanish
Portuguese
o = On, n = Off
4. Press the
settings and the next set of instructions in the language that
you selected. The printed instructions include submenu
tables that list all of the settings that you can change and
describe the appearance of the control panel lights for each
selection. Use these instructions to change the settings using
the control panel.
5. After making your changes, exit the default-settings mode by
turning off the printer.
Note:
You may exit the default-settings mode at any time by turning off the
printer. Any settings that you have made remain in effect until you
change them.
12-4
Using the Printer Software for DOS
R
cleaning button and turn on the printer
R
cleaning button until the control panel lights
S
n
n
n
o
o
o
E
load/eject button to print the current default
B A
n o
o n
o o
n n
n o
o n