Epson Stylus Color 980 Manual page 171

2. Type D:\SETUP at the DOS prompt. (If your CD-ROM drive
is assigned a drive letter other than "D", or if you are using the
floppy disk version, substitute the appropriate letter.)
3. Press the Enter key, then follow the on-screen instructions.
4. After running the setup program, type C:\EPCALIB2. (If your
hard drive is assigned a drive letter other than "C", substitute
the appropriate letter.)
5. Press the Enter key. The following window appears.
6. Make sure that your printer is selected. Click Next, then
follow the on-screen instructions.
For Macintosh users
Follow the steps below to align the print head.
1. Make sure that A4 or Letter size plain paper is loaded in the
sheet feeder.
2. Click the
Alignment button.
3. Follow the on-screen instructions to align the print head.
Utility icon button, then click the Print Head
9-11
Maintenance