Accessory And Hose Storage; Cord Wrap; Hose Storage - RIDGID 1610RVM0 Owner's Manual

Accessory and Hose Storage

Accessory Storage
Your Accessories may be stored in the
Tool Holder, or in the two locations on the
Caddy Right/Left.

Cord Wrap

When vacuuming is complete, unplug
the Cord and wrap it around the
Powerhead Carry Handle/Cord Wrap.
Secure the Cord using the Cord Clip
on the Plug.
SP7094 1610RVM S/E_1610RVM-SE.indd 35
Accessories
Tool
Holder
Extension
Wands
Accessory
Storage
on Caddy
Powerhead Carry
Handle/Cord Wrap
Cord Clip
Cord & Plug

Hose Storage

Either the Pro-Hose or the wands may
be stored in the two areas marked Hose
Storage.
The Hose may be stored by wrapping it
around the Powerhead Assembly and
plugging the Hose open end into one of the
storage locations on the Caddy Assembly.
Alternatively, the Wands may also be
stored in this location by plugging either of
the ends of the Wands onto the Storage
Receivers located on the Caddy.
CAUTION:
Do not operate vacuum while the
hose is still wrapped around the
powerhead assembly in the storage
position.
WARNING:
Do not put any object into ventilation
openings. Do not vacuum with any
ventilation openings blocked; keep
free of dust, lint, hair or anything that
may reduce air flow.
e
g
s r a
o
t o
H
S
e
35
H o s e
e
r a g
S t o
Hose Storage
Area
2/3/19 7:11 AM