Connecting The Super Speed Usb 5 Gbps (Usb 3.2 Gen1) Cable - Dell UltraSharp U3421WE User Manual

Connecting the super speed USB 5 Gbps (USB 3.2 Gen1) cable

NOTE: To prevent data damage or loss, before unplugging the USB
upstream port, make sure that NO USB storage devices are in use by
the computer connected to the monitor's USB downstream port.
After you have completed connecting the DisplayPort/HDMI/USB Type-C cable,
follow the procedures below to connect the USB cable to the computer and
complete your monitor setup:
1. a. Connect one computer: connect the USB 3.2 (Gen1) upstream port
(cable supplied) to an appropriate USB 3.2 (Gen1) port on your computer. 
b. Connect two computers*: connect the USB 3.2 (Gen1) upstream port
(cable supplied) and USB Type-C upstream port (cable supplied) to
appropriate USB ports on the two computers. Then use the OSD menu to
select between the USB upstream source and input sources. See USB.
2. Connect the USB peripherals to the USB downstream ports on the monitor.
3. Plug the power cables for your computer(s) and monitor into a nearby outlet.
a. Connect one computer
b. Connect two computers
Setting up the monitor
│
33