Download
Share
Print this page
  1. Manuals
  2. Brands
  3. alfi Manuals
  4. Plumbing Product
  5. AB3600BN
  6. Manual

alfi AB3600BN Manual

Single - lever bath room faucet
Hide thumbs Also See for AB3600BN:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
Thank you for choosing our company. Please make sure you have all necessary parts
by checking the diagram and component list.Please make sure of proper installation and
main­tainence for long-term performance.
Notice:
1.lmproper installation may cause severe failure, please make sure that this must be carried
out by qualified or well-experienced plumbers
2.This diagram is for reference only. The installation procedures may slightly differ from one to
other type of single-lever faucet and double-handle faucet.
*Warnings:
*
Disassembling of the faucet is prohibited, as it has been assembled & commissioned to the
best using condition.
*
Before installing, flush the water supplying pipes.
*
Do not over-forcing when installing.
*
Corrosive materials such as plastic cement or glue is prohibited when installing valves,
angle valves or connecting flexible hoses.
*
Make sure to connect hot and cold supplying water pipes correctly,left to hot and right to
cold facing from front of the faucet.
*
Technical parameters:
Nominal working pressure: 0.05MPa-1.0MPa (7.26psi-145psi).
Water temperature: 4
SINGLE - LEVER BATH ROOM FAUCET
°
°
C-90
C.
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the AB3600BN and is the answer not in the manual?

Questions and answers

Related Manuals for alfi AB3600BN

Summary of Contents for alfi AB3600BN

  • Page 1 SINGLE - LEVER BATH ROOM FAUCET Thank you for choosing our company. Please make sure you have all necessary parts by checking the diagram and component list.Please make sure of proper installation and main­tainence for long-term performance. Notice: 1.lmproper installation may cause severe failure, please make sure that this must be carried out by qualified or well-experienced plumbers 2.This diagram is for reference only.
  • Page 2 SINGLE - LEVER BATHROOM FAUCET *Cleaning and Maintenance To keep the product looking new,please follow the steps as below: 1.Simple rinse the product clean with clear water and dry the product with a soft cotton cloth. 2.Use mild liquid detergents, clear ammonia free liquid glass cleaners or non-abrasvie liquid polishers to remove surface firt and film.
  • Page 3 SINGLE - LEVER BATHROOM FAUCET A.Single-lever Bathroom faucet A-type fixation: Compoent list Pcs 1.Main bod y 2.Base 3.Washer A 4.Washer B 5.Gasket 6.Bolt 7.Nut 8.lnlet pipe 9.Manual *Diagram...

  • Page 4: Installation Procedures

    SINGLE - LEVER BATHROOM FAUCET Installation procedures 2.Put base(2) and washer A(3) through the inlet 1.1) Drill a hole of 032-035 on the installation pipes to main body, then put inlet pipes through deck. 2) Screw nut(?) off from bolt(6). 3) Fix the hole, and install the faucet with washe 8(4), bolt(6) and inlet pipes(8) onto the main body.
  • Page 5 SINGLE - LEVER BAT HROOM FAUCET 8-type fixation: Component list Pcs 1.Main body 2.Washer A 3.Base plate 4.Washer B 5.WasherC 6.Gasket ?.Nut a.Screws 9.lnlet pipes 10.Manual *Diagram 035-038...
  • Page 6 SINGLE - LEVER BATHROOM FAUCET Installation procedures 1.1) Drill a hole of 035-038 on the installation 2.With washer A(2), base plate(3) and washer deck. 2) Remove the nut (7), gasket(6) and 8(4) still on, put inlet pipes through deck hole, washer C(5) from the main body.