FLIR EXTECH HDV-WTX1 Product Sheet

FLIR EXTECH HDV-WTX1 Product Sheet

Wireless articulating semi-rigid probe for use with the hdv600 borescope only

Advertisement

Product sheet
 
Model HDV-WTX1
Wireless Articulating Semi-Rigid Probe
For use with the HDV600 Borescope only
Thank you for purchasing this professional camera probe. This sheet covers the warning and
specifications for the probe only. Instructions regarding the usage of the HDV600 Borescope are
provided in the Borescope User Guide.
Note: The camera LEDs become warm when set to maximum intensity
CAUTION: For the Articulating Probe, do not operate the articulation knob with the
probe in a coiled configuration. This will damage the articulation controls!
CAUTION: Always return the articulation and tension knobs to the neutral position
before removing the probe from the inspection area.
The label on the probe provides the Serial Number and Part Number in the format
shown below. Please do not remove this label; otherwise the warranty will be invalid.

Warnings

Do not bend to a smaller diameter than 10cm (4")
Warranty is invalid if stickers, tags, or labels are removed

Articulating Probe Description

1. Articulation knob
2. Articulation tension knob
3. Articulating camera
4. Light intensity buttons
5. Power button
6. AC Adaptor and extension cable sockets
7. Carrying strap
www.ponpe.com
Part No.TX1 F/M/R (flex/macro/rigid) Serial No: HDV110001
1
2
3
4
contact:
sale@ponpe.com
5
6
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EXTECH HDV-WTX1 and is the answer not in the manual?

Questions and answers

Summary of Contents for FLIR EXTECH HDV-WTX1

  • Page 1 Product sheet   Model HDV-WTX1 Wireless Articulating Semi-Rigid Probe For use with the HDV600 Borescope only Thank you for purchasing this professional camera probe. This sheet covers the warning and specifications for the probe only. Instructions regarding the usage of the HDV600 Borescope are provided in the Borescope User Guide.
  • Page 2 Storage Temperature -20 to 70°C (-4 to 158°F) Warranty 1 year Copyright © 2011 Extech Instruments Corporation (a FLIR company) All rights reserved including the right of reproduction in whole or in part in any form. www.extech.com Revision 2.1 2/12 contact: www.ponpe.com...

This manual is also suitable for:

Extech tx1 f/m/r

Table of Contents