Table of Contents
Advertisement
F.Equipment Installation
6-1 Extension Unit (EXU) and Control Unit (CU)
CU and EXU can be fixed on a 19-inch cabinet. CU is equipped with a
pair of fixing frames, as (1) in the following figure shows. First, remove the
screws on the lateral side of the machine, as (2) shows. Use these screws
to attach fixing frames to CU. Finally, use screws to fix CU on the cabinet,
as (3) shows.
1
2
3
6-2 Conference Unit
The conference unit can installed on desktop or embedded.
Embedded installation:
a) Cut a hole on the desktop. The size (mm) is as the following figure shows;
b) According to the following figure, on the bottom of the hole, drill two φ4mm screw
holes. The distance between the centers of the screw holes is 80mm;
c) Adjust the two cable outlets behind the conference unit according to the actual
situation, in order to ensure availability of further installation;
d) Put the conference unit into the hole on desktop, and fix it from the bottom with
screws. Choose appropriate screw length according to the desk thickness.
2
3
41
Advertisement
Table of Contents
