Usb Transfer - LaserLiner AirflowTest-Master Manual

MIN/MAX / HOLD
7
The MAX function is activated by pressing the „MAX/MIN" button. The
measured value currently displayed corresponds to the largest measured value.
Press the „MAX/MIN" button again to activate the MIN function and show the
smallest measured value. To deactivate „MAX/MIN", press the button again
until the value is no longer shown on the display.
Press the „HOLD" button to hold the current measured value on the display.
Press the button again to deactivate this function.

USB transfer

8
Measured values can be transferred to a PC
in realtime via the integrated USB interface.
The values can then be stored and documen-
ted using the supplied software. First install
the software and the corresponding drivers
from the CD to the terminal unit. Follow the
instructions for the installation routine. Once
you have successfully installed the software,
connect the measuring instrument to the PC
and set up a USB connection.
Start the software and activate the USB func-
tion by pressing and holding the „USB" but-
ton. The software now shows the measured
values both in numerical as well as in graphic
form.
For further information on how to use the
software, refer to the Help function that con-
tains a detailed description of the functions.
12
GB
1.
2.
3.