Using Si-002 Connects To Microsip Utility - ICP DAS USA SI-002 User Manual

2.3. Using SI-002 connects to MicroSIP Utility

When RSW of SI-002 set to "B", SI-002 will use a default IP settings to connect PC.
The default IP settings are as follows:
SI-002
IP Address
Subnet Mask
PC side
IP Address
Subnet Mask
Step 1: Run the MicroSIP Utility
Double-click the MicroSIP Utility (v3.18.5) shortcut on your desktop.
SI-002 User Manual, version 1.1
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
192.168.72.30
255.255.0.0
192.168.255.1 (See Section 3.2.4
255.255.0.0
Page: 15
Standard Config)