What If There Are Problems; Technical Data - Beurer LA 40 Instructions For Use Manual

10. What if there are problems?

Problem
No mist is being
emitted from the
device�
Only a small
amount of mist
is being emitted
from the device�
The LED of the
Mist/timer button
is illuminated and
the device is run-
ning, but no mist
is emitted�
If you cannot find a solution to your problem here, contact our Customer Services�

11. Technical data

Product name
Supply
Water tank capacity
Room size
How it works
Mist settings
Running time
Timer duration
Weight
Dimensions
Average active efficiency
Cause
Mains adapter is not
plugged in�
There is not enough wa-
ter in the water tank�
There is too much water
in the water tank�
Ultrasonic vaporiser is
blocked�
The outlet in the porce-
lain cover is blocked�
Condensation is blocking
the ventilation opening in
the water tank�
LA 40
Input: 100 – 240 V, ~50/60 Hz, 0�4 A max
Output: 24�0 V
180 ml
Up to approx� 20 m
Ultrasonic atomiser
Continuous mist and intermittent mist
approx� 9 hours of continuous mist
approx� 18 hours of intermittent mist
1 hour, 3 hours, 7 hours, continuous operation
LA 40: approx� 508 g,
Adapter: approx� 80 g
Ø 129 mm x 167 mm
≥ 83�13 %
Solution
Insert the mains adapter into a
suitable socket�
Fill the water tank up to the
"MAX" marking�
Pour away excess water from
the water tank until it only
reaches the "MAX" marking�
Clean the ultrasonic vaporiser
as described in the "Cleaning
and maintenance" chapter�
Check that the outlet in the
porcelain cover is not blocked�
Open the ventilation cover and
remove the condensation at
the ventilation opening�
0�5 A, 12�0 W
2
27