Table of Contents
Advertisement
TEMPERATURE USE GUIDELINES FOR
PNEUMATIC DAT SERIES SHOWERS AND SHELTERS
ATTENTION:
Hot air expands and cold air compresses and so the weather
impacts the air berms of your DAT series product in use.
COLD WEATHER USE:
Recommended for use in temperatures to -30 C (-22 F)
Fully inflate to the point of the over pressure valve almost being
activated (if activated cease air fill immediately) if being used in
extreme cold weather since the cold air will actually contract
inside the berms and the air berms may feel slightly 'soft' to the
touch.
WARM WEATHER USE:
Recommended for use in temperatures to +40 C (+104 F)
When temperatures during use are to exceed 30 degrees C (86 F)
be aware hot air expands and so manually reduce the air
pressure in the air berms or allow over pressure valves to
activate. As the evening shift arrives in continued use, and air
temperature drops re-inflate the unit as colder air causes
internal air pressure to decrease.
AT THE COMMENCEMENT OF EACH SHIFT FSI STRONGLY
ENCOURAGES AND RECOMMENDS THAT THE AIR PRESSURE
INTERNALLY BE CHECKED AND ADDRESSED AS ABOVE, AND
THAT A COMPLETE SYSTEMS CHECK OCCUR ON ALL ITEMS IN
USE WITH THE DAT SERIES SHOWER OR SHELTER SYSTEM.
ATTENTION:
When removing FSI showers/shelters from the carry sleeve/bag,
ensure there are no sharp objects or glass on the floor that might
tear or puncture the inflatable structure. Avoid dragging the unit
over rough surfaces. The use of a tarp/groundsheet is strongly
recommended for inexpensive protection and maximum
longevity of the floor and berms.
5
Advertisement
Table of Contents
